This is the machine to buy if you are cutting pipe 12 inches and below, such as stair rails, machine frames or plumbing. Cuts perfect 90 degree saddle joints to connect any size branch to any size trunk, including 1:1 matches. Miters can be set to any practical angle. This machine will save you hours of labor.

The W-60-20SM cuts straight cuts, miters, and 90 degree saddles on pipe up to 12". Set the cam using the chart on the side of the machine to produce the shape desired. This machine comes standard with an oxy fuel torch that utilizes a Victor style 3-101 size torch tip. The torch can be rotated to produce the desired weld bevel. Comes standard with Rotary Ground and wired for plasma. Optional accessories allow you use a machine plasma system in addition to oxy-fuel.

The smallest Watts machine is popular in schools and small shops. When training students or workers you can quickly prepare pipe samples for practice and testing. Straight cuts with bevels can be produced quickly and accurately using pipe up to 12 inches in diameter. The internal chucking design works well with small pipe and allows torch or plasma cutting. For long pipe optional scissor jack, modular stands and rollers are available. The new W-60-20 has an ungraded motor and double the torque of the previous W-60-12.

Specifications
• Diameter: 1 1/4 - 12 inches
• Length: Depends on carriage
• Volts: 110V
• Amps: 4
• Shipping Weight: 170 lbs

Available on the new W-60-20 is the optional 32 pitch torch holder for plasma, or oxy-fuel torch.