Watts Machines



C212 Two Axis Programmable Cutter

The Watts programmable 2 axis cutter is capable of cutting from 1.25" up to 12" diameter pipe. Pipe is gripped with a 3 jaw chuck with internal or external jaws. Twelve [12"] pipe is gripped internally using the external jaws. Programming is accomplished via a handheld pendant and multiple cuts can be linked together.

The pipe rotation (Y) and horizontal torch movement (X) are computer controlled to work in sequences to produce the programmable shape.
Programming is very simple. The operator chooses the cut profile, follows the prompts with regards to mate diameter, mate angle, hole diameter, miter angle, etc.
The torch is moved to the cut position and the start is initiated. Multiple cuts can be linked together so the torch moves from cut to cut. The torch bevel is manually rotated.

Cuts Included
• Straight cuts
• Saddles at any angle
• Holes at any angle
• Hillside holes and saddles
• Miters
• Ovals
• Slots
• Squares
• Dummy legs





W-60-20SM Saddle-Miter Pipe Cutter

The W-60-20SM cuts straight cuts, miters, and 90 degree saddles on pipe up to 12". Set the cam using the chart on the side of the machine to produce the shape desired. This machine comes standard with an oxy fuel torch that utilizes a Victor style 3-101 size torch tip. The torch can be rotated to produce the desired weld bevel. Comes standard with Rotary Ground and wired for plasma. Optional accessories allow you use a machine plasma system in addition to oxy-fuel.

Table Top W-60-20SM

The W-60-20SM can be mounted as a table top machine, adding flexibility to your shop.


Saddle Joints

Saddle joints of all angles are possible with this machine.


Repeatable Cuts

When you need repeatable joint cuts, Watts machines can save you time and money.


Specifications
• Diameter: 1 1/4 - 12 inches
• Length: Depends on carriage
• Volts: 110V
• Amps: 4
• Shipping Weight: 195 lbs




W-60-20 Straight Pipe Cutter

Pipe Beveler, Coupon Cutter

The W-60-20 Straight Pipe Cutter is popular in schools and small shops. When training students or workers you can quickly prepare pipe samples for practice and testing. Straight cuts with bevels can be produced quickly and accurately using pipe up to 12 inches in diameter. The internal chucking design works well with small pipe and allows torch or plasma cutting. For long pipe optional scissor jack, modular stands and rollers are available. The new W-60-20 has an ungraded motor and double the torque of the previous W-60-12.

Available on the new W-60-20 is the optional 32 pitch torch holder for plasma, or oxy-fuel torch.

Specifications
• Diameter: 1 1/4 - 12 inches
• Length: Depends on carriage
• Volts: 110V
• Amps: 4
• Shipping Weight: 170 lbs


The Watts Machinery Team


Dave Collins

President

253-770-4858
davec@wattsmachinery.com

Katie Collins

Vice President

253-202-2200
katiec@wattsmachinery.com